# Makefile.in generated by automake 1.10.1 from Makefile.am.
# install-win32/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#
#  OpenVPN -- An application to securely tunnel IP networks
#             over a single UDP port, with support for SSL/TLS-based
#             session authentication and key exchange,
#             packet encryption, packet authentication, and
#             packet compression.
#
#  Copyright (C) 2002-2009 OpenVPN Technologies, Inc. <sales@openvpn.net>
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License version 2
#  as published by the Free Software Foundation.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program (see the file COPYING included with this
#  distribution); if not, write to the Free Software Foundation, Inc.,
#  59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#


pkgdatadir = $(datadir)/openvpn
pkglibdir = $(libdir)/openvpn
pkgincludedir = $(includedir)/openvpn
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = mipsel-unknown-linux-gnu
target_triplet = mipsel-unknown-linux-gnu
am__append_1 = sample.ovpn
subdir = install-win32
DIST_COMMON = $(am__dist_conf_DATA_DIST) $(am__dist_noinst_DATA_DIST) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/settings.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/version.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = settings
SOURCES =
DIST_SOURCES =
am__dist_conf_DATA_DIST = sample.ovpn
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(confdir)" "$(DESTDIR)$(confdir)" \
	"$(DESTDIR)$(docdir)" "$(DESTDIR)$(easyrsadir)" \
	"$(DESTDIR)$(keysdir)"
dist_confDATA_INSTALL = $(INSTALL_DATA)
am__dist_noinst_DATA_DIST = openssl GetWindowsVersion.nsi \
	build-pkcs11-helper.sh buildinstaller ddk-common doclean \
	dosname.pl getgui getopenssl getpkcs11helper getprebuilt \
	getxgui ifdef.pl m4todef.pl macro.pl makeopenvpn maketap \
	maketapinstall maketext openvpn.nsi setpath.nsi settings.in \
	trans.pl u2d.c winconfig sample.ovpn
nodist_confDATA_INSTALL = $(INSTALL_DATA)
nodist_docDATA_INSTALL = $(INSTALL_DATA)
nodist_easyrsaDATA_INSTALL = $(INSTALL_DATA)
nodist_keysDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_conf_DATA) $(dist_noinst_DATA) $(nodist_conf_DATA) \
	$(nodist_doc_DATA) $(nodist_easyrsa_DATA) $(nodist_keys_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run aclocal-1.10
AMTAR = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run tar
AUTOCONF = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run autoconf
AUTOHEADER = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run autoheader
AUTOMAKE = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run automake-1.10
AWK = mawk
CC = mipsel-uclibc-gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -Os -Wall -DLINUX26 -DCONFIG_BCMWL5 -pipe -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32  -ffunction-sections -fdata-sections
CPP = mipsel-uclibc-gcc -E
CPPFLAGS =  -I/home/vicente/tomatoraf/release/src-rt/router/openssl/include/ -I/home/vicente/tomatoraf/release/src-rt/router/lzo/include -I.
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
GREP = /bin/grep
IFCONFIG = /sbin/ifconfig
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
IPROUTE = /usr/sbin/ip
LDFLAGS = -L/home/vicente/tomatoraf/release/src-rt/router/openssl -L/home/vicente/tomatoraf/release/src-rt/router/lzo/src/.libs -ffunction-sections -fdata-sections -Wl,--gc-sections
LIBOBJS =  ${LIBOBJDIR}memcmp$U.o
LIBS = -lssl -lcrypto -llzo2 
LTLIBOBJS =  ${LIBOBJDIR}memcmp$U.lo
MAKEINFO = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run makeinfo
MAN2HTML = 
MKDIR_P = /bin/mkdir -p
OBJEXT = o
PACKAGE = openvpn
PACKAGE_BUGREPORT = openvpn-users@lists.sourceforge.net
PACKAGE_NAME = OpenVPN
PACKAGE_STRING = OpenVPN 2.1.1
PACKAGE_TARNAME = openvpn
PACKAGE_VERSION = 2.1.1
PATH_SEPARATOR = :
PTHREAD_CC = 
PTHREAD_CFLAGS = 
PTHREAD_LIBS = 
ROUTE = /sbin/route
SET_MAKE = 
SHELL = /bin/bash
STRIP = mipsel-uclibc-strip -R .note -R .comment
TAP_ID = tap0901
TAP_WIN32_MIN_MAJOR = 9
TAP_WIN32_MIN_MINOR = 1
VERSION = 2.1.1
abs_builddir = /home/vicente/tomatoraf/release/src/router/openvpn/install-win32
abs_srcdir = /home/vicente/tomatoraf/release/src/router/openvpn/install-win32
abs_top_builddir = /home/vicente/tomatoraf/release/src/router/openvpn
abs_top_srcdir = /home/vicente/tomatoraf/release/src/router/openvpn
ac_ct_CC = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias = x86_64-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = mipsel-unknown-linux-gnu
host_alias = mipsel-linux
host_cpu = mipsel
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /home/vicente/tomatoraf/release/src/router/openvpn/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = 
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target = mipsel-unknown-linux-gnu
target_alias = 
target_cpu = mipsel
target_os = linux-gnu
target_vendor = unknown
top_builddir = ..
top_srcdir = ..
win32datadir = ${datadir}/openvpn-win32
MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
dist_noinst_DATA = openssl GetWindowsVersion.nsi \
	build-pkcs11-helper.sh buildinstaller ddk-common doclean \
	dosname.pl getgui getopenssl getpkcs11helper getprebuilt \
	getxgui ifdef.pl m4todef.pl macro.pl makeopenvpn maketap \
	maketapinstall maketext openvpn.nsi setpath.nsi settings.in \
	trans.pl u2d.c winconfig $(am__append_1)
#nodist_doc_DATA = tmp/license.txt
#confdir = $(win32datadir)/config
#nodist_conf_DATA = \
#	tmp/openssl.cnf.sample \
#	tmp/client.ovpn \
#	tmp/server.ovpn

#dist_conf_DATA = \
#	sample.ovpn

#easyrsadir = $(win32datadir)/easy-rsa/Windows
#nodist_easyrsa_DATA = \
#	$(top_srcdir)/easy-rsa/Windows/*

#keysdir = $(win32datadir)/sample-keys
#nodist_keys_DATA = \
#	$(top_srcdir)/sample-keys/*

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  install-win32/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  install-win32/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
settings: $(top_builddir)/config.status $(srcdir)/settings.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
install-dist_confDATA: $(dist_conf_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(confdir)" || $(MKDIR_P) "$(DESTDIR)$(confdir)"
	@list='$(dist_conf_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_confDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(confdir)/$$f'"; \
	  $(dist_confDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(confdir)/$$f"; \
	done

uninstall-dist_confDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_conf_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(confdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(confdir)/$$f"; \
	done
install-nodist_confDATA: $(nodist_conf_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(confdir)" || $(MKDIR_P) "$(DESTDIR)$(confdir)"
	@list='$(nodist_conf_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(nodist_confDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(confdir)/$$f'"; \
	  $(nodist_confDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(confdir)/$$f"; \
	done

uninstall-nodist_confDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_conf_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(confdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(confdir)/$$f"; \
	done
install-nodist_docDATA: $(nodist_doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
	@list='$(nodist_doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(nodist_docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
	  $(nodist_docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
	done

uninstall-nodist_docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_doc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
	done
install-nodist_easyrsaDATA: $(nodist_easyrsa_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(easyrsadir)" || $(MKDIR_P) "$(DESTDIR)$(easyrsadir)"
	@list='$(nodist_easyrsa_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(nodist_easyrsaDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(easyrsadir)/$$f'"; \
	  $(nodist_easyrsaDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(easyrsadir)/$$f"; \
	done

uninstall-nodist_easyrsaDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_easyrsa_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(easyrsadir)/$$f'"; \
	  rm -f "$(DESTDIR)$(easyrsadir)/$$f"; \
	done
install-nodist_keysDATA: $(nodist_keys_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(keysdir)" || $(MKDIR_P) "$(DESTDIR)$(keysdir)"
	@list='$(nodist_keys_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(nodist_keysDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(keysdir)/$$f'"; \
	  $(nodist_keysDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(keysdir)/$$f"; \
	done

uninstall-nodist_keysDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_keys_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(keysdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(keysdir)/$$f"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(confdir)" "$(DESTDIR)$(confdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(easyrsadir)" "$(DESTDIR)$(keysdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean-local:
clean: clean-am

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-dist_confDATA install-nodist_confDATA \
	install-nodist_docDATA install-nodist_easyrsaDATA \
	install-nodist_keysDATA

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_confDATA uninstall-nodist_confDATA \
	uninstall-nodist_docDATA uninstall-nodist_easyrsaDATA \
	uninstall-nodist_keysDATA

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-local \
	distclean distclean-generic distdir dvi dvi-am html html-am \
	info info-am install install-am install-data install-data-am \
	install-dist_confDATA install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-nodist_confDATA \
	install-nodist_docDATA install-nodist_easyrsaDATA \
	install-nodist_keysDATA install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
	uninstall-am uninstall-dist_confDATA uninstall-nodist_confDATA \
	uninstall-nodist_docDATA uninstall-nodist_easyrsaDATA \
	uninstall-nodist_keysDATA


#tmp:
#	mkdir tmp

#tmp/client.ovpn:	tmp $(top_srcdir)/sample-config-files/client.conf
#	cp $(top_srcdir)/sample-config-files/client.conf tmp/client.ovpn

#tmp/server.ovpn:	tmp $(top_srcdir)/sample-config-files/server.conf
#	cp $(top_srcdir)/sample-config-files/server.conf tmp/server.ovpn

#tmp/license.txt:	tmp $(top_srcdir)/COPYING $(top_srcdir)/COPYRIGHT.GPL
#	cat $(top_srcdir)/COPYING $(top_srcdir)/COPYRIGHT.GPL > tmp/license.txt

#tmp/openssl.cnf.sample:	tmp $(top_srcdir)/easy-rsa/2.0/openssl.cnf
#	cp $(top_srcdir)/easy-rsa/2.0/openssl.cnf tmp/openssl.cnf.sample

#clean-local:
#	-rm -fr tmp
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
