# Makefile.in generated by automake 1.10.1 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#
#  OpenVPN -- An application to securely tunnel IP networks
#             over a single UDP port, with support for SSL/TLS-based
#             session authentication and key exchange,
#             packet encryption, packet authentication, and
#             packet compression.
#
#  Copyright (C) 2002-2009 OpenVPN Technologies, Inc. <sales@openvpn.net>
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License version 2
#  as published by the Free Software Foundation.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program (see the file COPYING included with this
#  distribution); if not, write to the Free Software Foundation, Inc.,
#  59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#





pkgdatadir = $(datadir)/openvpn
pkglibdir = $(libdir)/openvpn
pkgincludedir = $(includedir)/openvpn
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = mipsel-unknown-linux-gnu
target_triplet = mipsel-unknown-linux-gnu
sbin_PROGRAMS = openvpn$(EXEEXT)
#am__append_1 = openvpn.8
subdir = .
DIST_COMMON = README $(am__configure_deps) \
	$(am__dist_noinst_DATA_DIST) $(dist_man_MANS) \
	$(dist_noinst_HEADERS) $(dist_noinst_SCRIPTS) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/config-win32.h.in $(srcdir)/config.h.in \
	$(srcdir)/openvpn.spec.in $(top_srcdir)/configure AUTHORS \
	COPYING ChangeLog INSTALL NEWS config.guess config.sub depcomp \
	install-sh memcmp.c missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/version.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = openvpn.spec config-win32.h
am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" \
	"$(DESTDIR)$(htmldir)"
sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(sbin_PROGRAMS)
am_openvpn_OBJECTS = base64.$(OBJEXT) buffer.$(OBJEXT) \
	crypto.$(OBJEXT) dhcp.$(OBJEXT) error.$(OBJEXT) \
	event.$(OBJEXT) fdmisc.$(OBJEXT) forward.$(OBJEXT) \
	fragment.$(OBJEXT) gremlin.$(OBJEXT) helper.$(OBJEXT) \
	lladdr.$(OBJEXT) init.$(OBJEXT) interval.$(OBJEXT) \
	list.$(OBJEXT) lzo.$(OBJEXT) manage.$(OBJEXT) mbuf.$(OBJEXT) \
	misc.$(OBJEXT) mroute.$(OBJEXT) mss.$(OBJEXT) mtcp.$(OBJEXT) \
	mtu.$(OBJEXT) mudp.$(OBJEXT) multi.$(OBJEXT) ntlm.$(OBJEXT) \
	occ.$(OBJEXT) pkcs11.$(OBJEXT) openvpn.$(OBJEXT) \
	options.$(OBJEXT) otime.$(OBJEXT) packet_id.$(OBJEXT) \
	perf.$(OBJEXT) pf.$(OBJEXT) ping.$(OBJEXT) plugin.$(OBJEXT) \
	pool.$(OBJEXT) proto.$(OBJEXT) proxy.$(OBJEXT) \
	ieproxy.$(OBJEXT) ps.$(OBJEXT) push.$(OBJEXT) \
	reliable.$(OBJEXT) route.$(OBJEXT) schedule.$(OBJEXT) \
	session_id.$(OBJEXT) shaper.$(OBJEXT) sig.$(OBJEXT) \
	socket.$(OBJEXT) socks.$(OBJEXT) ssl.$(OBJEXT) \
	status.$(OBJEXT) thread.$(OBJEXT) tun.$(OBJEXT) \
	win32.$(OBJEXT) cryptoapi.$(OBJEXT)
openvpn_OBJECTS = $(am_openvpn_OBJECTS)
openvpn_LDADD = $(LDADD)
openvpn_DEPENDENCIES =  ${LIBOBJDIR}memcmp$U.o
SCRIPTS = $(dist_noinst_SCRIPTS)
DEFAULT_INCLUDES = -I.
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(openvpn_SOURCES)
DIST_SOURCES = $(openvpn_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(dist_man_MANS)
am__dist_noinst_DATA_DIST = openvpn.spec COPYRIGHT.GPL PORTS \
	INSTALL-win32.txt openvpn.8
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
nodist_htmlDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_noinst_DATA) $(nodist_html_DATA)
HEADERS = $(dist_noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run aclocal-1.10
AMTAR = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run tar
AUTOCONF = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run autoconf
AUTOHEADER = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run autoheader
AUTOMAKE = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run automake-1.10
AWK = mawk
CC = mipsel-uclibc-gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -Os -Wall -DLINUX26 -DCONFIG_BCMWL5 -pipe -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32  -ffunction-sections -fdata-sections
CPP = mipsel-uclibc-gcc -E
CPPFLAGS =  -I/home/vicente/tomatoraf/release/src-rt/router/openssl/include/ -I/home/vicente/tomatoraf/release/src-rt/router/lzo/include -I.
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
GREP = /bin/grep
IFCONFIG = /sbin/ifconfig
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
IPROUTE = /usr/sbin/ip
LDFLAGS = -L/home/vicente/tomatoraf/release/src-rt/router/openssl -L/home/vicente/tomatoraf/release/src-rt/router/lzo/src/.libs -ffunction-sections -fdata-sections -Wl,--gc-sections
LIBOBJS =  ${LIBOBJDIR}memcmp$U.o
LIBS = -lssl -lcrypto -llzo2 
LTLIBOBJS =  ${LIBOBJDIR}memcmp$U.lo
MAKEINFO = ${SHELL} /home/vicente/tomatoraf/release/src/router/openvpn/missing --run makeinfo
MAN2HTML = 
MKDIR_P = /bin/mkdir -p
OBJEXT = o
PACKAGE = openvpn
PACKAGE_BUGREPORT = openvpn-users@lists.sourceforge.net
PACKAGE_NAME = OpenVPN
PACKAGE_STRING = OpenVPN 2.1.1
PACKAGE_TARNAME = openvpn
PACKAGE_VERSION = 2.1.1
PATH_SEPARATOR = :
PTHREAD_CC = 
PTHREAD_CFLAGS = 
PTHREAD_LIBS = 
ROUTE = /sbin/route
SET_MAKE = 
SHELL = /bin/bash
STRIP = mipsel-uclibc-strip -R .note -R .comment
TAP_ID = tap0901
TAP_WIN32_MIN_MAJOR = 9
TAP_WIN32_MIN_MINOR = 1
VERSION = 2.1.1
abs_builddir = /home/vicente/tomatoraf/release/src/router/openvpn
abs_srcdir = /home/vicente/tomatoraf/release/src/router/openvpn
abs_top_builddir = /home/vicente/tomatoraf/release/src/router/openvpn
abs_top_srcdir = /home/vicente/tomatoraf/release/src/router/openvpn
ac_ct_CC = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias = x86_64-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = mipsel-unknown-linux-gnu
host_alias = mipsel-linux
host_cpu = mipsel
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /home/vicente/tomatoraf/release/src/router/openvpn/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = 
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target = mipsel-unknown-linux-gnu
target_alias = 
target_cpu = mipsel
target_os = linux-gnu
target_vendor = unknown
top_builddir = .
top_srcdir = .
win32datadir = ${datadir}/openvpn-win32
LDADD =  ${LIBOBJDIR}memcmp$U.o

# This option prevents autoreconf from overriding our COPYING and
# INSTALL targets:
AUTOMAKE_OPTIONS = foreign
MAINTAINERCLEANFILES = \
	config.log config.status \
	$(srcdir)/Makefile.in \
	$(srcdir)/config.h.in $(srcdir)/config.h.in~ $(srcdir)/configure \
	$(srcdir)/install-sh $(srcdir)/ltmain.sh $(srcdir)/missing \
	$(srcdir)/depcomp $(srcdir)/aclocal.m4 \
	$(srcdir)/config.guess $(srcdir)/config.sub \
	$(srcdir)/config-win32.h $(srcdir)/openvpn.spec

CLEANFILES = openvpn.8.html
EXTRA_DIST = \
	easy-rsa \
	sample-config-files \
	sample-keys \
	sample-scripts \
	suse \
	tap-win32 \
	contrib \
	debug \
	plugin

SUBDIRS = \
	images \
	service-win32 \
	install-win32

TESTS = t_lpback.sh t_cltsrv.sh
dist_noinst_HEADERS = \
	config-win32.h

dist_noinst_SCRIPTS = \
	$(TESTS) \
	doclean \
	domake-win \
	t_cltsrv-down.sh

dist_noinst_DATA = openvpn.spec COPYRIGHT.GPL PORTS INSTALL-win32.txt \
	$(am__append_1)
openvpn_SOURCES = \
        base64.c base64.h \
	basic.h \
	buffer.c buffer.h \
	circ_list.h \
	common.h \
	crypto.c crypto.h \
	dhcp.c dhcp.h \
	errlevel.h \
	error.c error.h \
	event.c event.h \
	fdmisc.c fdmisc.h \
        forward.c forward.h forward-inline.h \
	fragment.c fragment.h \
	gremlin.c gremlin.h \
	helper.c helper.h \
	lladdr.c lladdr.h \
	init.c init.h \
	integer.h \
        interval.c interval.h \
	list.c list.h \
	lzo.c lzo.h \
	manage.c manage.h \
	mbuf.c mbuf.h \
        memdbg.h \
	misc.c misc.h \
	mroute.c mroute.h \
	mss.c mss.h \
	mtcp.c mtcp.h \
	mtu.c mtu.h \
	mudp.c mudp.h \
	multi.c multi.h \
        ntlm.c ntlm.h \
	occ.c occ.h occ-inline.h \
	pkcs11.c pkcs11.h \
	openvpn.c openvpn.h \
	openvpn-plugin.h \
	options.c options.h \
	otime.c otime.h \
	packet_id.c packet_id.h \
	perf.c perf.h \
	pf.c pf.h pf-inline.h \
	ping.c ping.h ping-inline.h \
	plugin.c plugin.h \
	pool.c pool.h \
	proto.c proto.h \
	proxy.c proxy.h \
	ieproxy.h ieproxy.c \
        ps.c ps.h \
	push.c push.h \
	pushlist.h \
	reliable.c reliable.h \
	route.c route.h \
	schedule.c schedule.h \
	session_id.c session_id.h \
	shaper.c shaper.h \
	sig.c sig.h \
	socket.c socket.h \
	socks.c socks.h \
	ssl.c ssl.h \
	status.c status.h \
	syshead.h \
	thread.c thread.h \
	tun.c tun.h \
	win32.h win32.c \
	cryptoapi.h cryptoapi.c

#nodist_html_DATA = openvpn.8.html
dist_man_MANS = openvpn.8
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .o .obj
am--refresh:
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in:  $(am__configure_deps) 
	cd $(top_srcdir) && $(AUTOHEADER)
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
openvpn.spec: $(top_builddir)/config.status $(srcdir)/openvpn.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
config-win32.h: $(top_builddir)/config.status $(srcdir)/config-win32.h.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-sbinPROGRAMS: $(sbin_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
	@list='$(sbin_PROGRAMS)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
	   $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
	  else :; fi; \
	done

uninstall-sbinPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(sbin_PROGRAMS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
	  rm -f "$(DESTDIR)$(sbindir)/$$f"; \
	done

clean-sbinPROGRAMS:
	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
openvpn$(EXEEXT): $(openvpn_OBJECTS) $(openvpn_DEPENDENCIES) 
	@rm -f openvpn$(EXEEXT)
	$(LINK) $(openvpn_OBJECTS) $(openvpn_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include $(DEPDIR)/memcmp.Po
include ./$(DEPDIR)/base64.Po
include ./$(DEPDIR)/buffer.Po
include ./$(DEPDIR)/crypto.Po
include ./$(DEPDIR)/cryptoapi.Po
include ./$(DEPDIR)/dhcp.Po
include ./$(DEPDIR)/error.Po
include ./$(DEPDIR)/event.Po
include ./$(DEPDIR)/fdmisc.Po
include ./$(DEPDIR)/forward.Po
include ./$(DEPDIR)/fragment.Po
include ./$(DEPDIR)/gremlin.Po
include ./$(DEPDIR)/helper.Po
include ./$(DEPDIR)/ieproxy.Po
include ./$(DEPDIR)/init.Po
include ./$(DEPDIR)/interval.Po
include ./$(DEPDIR)/list.Po
include ./$(DEPDIR)/lladdr.Po
include ./$(DEPDIR)/lzo.Po
include ./$(DEPDIR)/manage.Po
include ./$(DEPDIR)/mbuf.Po
include ./$(DEPDIR)/misc.Po
include ./$(DEPDIR)/mroute.Po
include ./$(DEPDIR)/mss.Po
include ./$(DEPDIR)/mtcp.Po
include ./$(DEPDIR)/mtu.Po
include ./$(DEPDIR)/mudp.Po
include ./$(DEPDIR)/multi.Po
include ./$(DEPDIR)/ntlm.Po
include ./$(DEPDIR)/occ.Po
include ./$(DEPDIR)/openvpn.Po
include ./$(DEPDIR)/options.Po
include ./$(DEPDIR)/otime.Po
include ./$(DEPDIR)/packet_id.Po
include ./$(DEPDIR)/perf.Po
include ./$(DEPDIR)/pf.Po
include ./$(DEPDIR)/ping.Po
include ./$(DEPDIR)/pkcs11.Po
include ./$(DEPDIR)/plugin.Po
include ./$(DEPDIR)/pool.Po
include ./$(DEPDIR)/proto.Po
include ./$(DEPDIR)/proxy.Po
include ./$(DEPDIR)/ps.Po
include ./$(DEPDIR)/push.Po
include ./$(DEPDIR)/reliable.Po
include ./$(DEPDIR)/route.Po
include ./$(DEPDIR)/schedule.Po
include ./$(DEPDIR)/session_id.Po
include ./$(DEPDIR)/shaper.Po
include ./$(DEPDIR)/sig.Po
include ./$(DEPDIR)/socket.Po
include ./$(DEPDIR)/socks.Po
include ./$(DEPDIR)/ssl.Po
include ./$(DEPDIR)/status.Po
include ./$(DEPDIR)/thread.Po
include ./$(DEPDIR)/tun.Po
include ./$(DEPDIR)/win32.Po

.c.o:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `$(CYGPATH_W) '$<'`
install-man8: $(man8_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
	done
uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
	done
install-nodist_htmlDATA: $(nodist_html_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(nodist_html_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(nodist_htmlDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
	  $(nodist_htmlDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-nodist_htmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_html_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -f "$(DESTDIR)$(htmldir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; ws='[	 ]'; \
	srcdir=$(srcdir); export srcdir; \
	list=' $(TESTS) '; \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *$$ws$$tst$$ws*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		echo "XPASS: $$tst"; \
	      ;; \
	      *) \
		echo "PASS: $$tst"; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *$$ws$$tst$$ws*) \
		xfail=`expr $$xfail + 1`; \
		echo "XFAIL: $$tst"; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		echo "FAIL: $$tst"; \
	      ;; \
	      esac; \
	    else \
	      skip=`expr $$skip + 1`; \
	      echo "SKIP: $$tst"; \
	    fi; \
	  done; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="All $$all tests passed"; \
	    else \
	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all tests failed"; \
	    else \
	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
	    fi; \
	  fi; \
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    skipped="($$skip tests were not run)"; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  echo "$$dashes"; \
	  echo "$$banner"; \
	  test -z "$$skipped" || echo "$$skipped"; \
	  test -z "$$report" || echo "$$report"; \
	  echo "$$dashes"; \
	  test "$$failed" -eq 0; \
	else :; fi

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d $(distdir) || mkdir $(distdir)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(MANS) $(DATA) $(HEADERS) \
		config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(DEPDIR) ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-man install-nodist_htmlDATA

install-dvi: install-dvi-recursive

install-exec-am: install-sbinPROGRAMS

install-html: install-html-recursive

install-info: install-info-recursive

install-man: install-man8

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf $(DEPDIR) ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-man uninstall-nodist_htmlDATA \
	uninstall-sbinPROGRAMS

uninstall-man: uninstall-man8

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-TESTS check-am clean \
	clean-generic clean-sbinPROGRAMS ctags ctags-recursive dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzma dist-shar \
	dist-tarZ dist-zip distcheck distclean distclean-compile \
	distclean-generic distclean-hdr distclean-tags distcleancheck \
	distdir distuninstallcheck dvi dvi-am html html-am info \
	info-am install install-am install-data install-data-am \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-info install-info-am \
	install-man install-man8 install-nodist_htmlDATA install-pdf \
	install-pdf-am install-ps install-ps-am install-sbinPROGRAMS \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
	ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-man uninstall-man8 uninstall-nodist_htmlDATA \
	uninstall-sbinPROGRAMS

.PHONY: plugin

dist-hook:
	cd $(distdir) && for i in $(EXTRA_DIST) ; do find $$i -name .svn -type d -prune -exec rm -rf '{}' ';' ; rm -f `find $$i -type f | grep -E '(^|\/)\.?\#|\~$$|\.s?o$$'` ; done
#openvpn.8.html: $(srcdir)/openvpn.8
#	$(MAN2HTML) < $(srcdir)/openvpn.8 > openvpn.8.html
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
